What’s actually in a boiler service plan
Most people know they should get their boiler serviced. Here’s what that actually involves, and what a plan adds on top.
Most people know they should get their boiler serviced. Far fewer know what that actually involves, or what a service plan adds on top of it.
What a service actually involves
When an engineer arrives for your annual service, they’re running through specific checks, not just a general look-over. The combustion test is central to it — a flue gas analysis probe measures the combustion gases and carbon monoxide levels. Poor combustion wastes money on your bills and, worse, can produce dangerous CO.
We check the gas valve’s function and pressure, both at rest and under load, test for gas tightness, and recharge the expansion vessel if it needs it. This pressurised chamber absorbs the pressure changes as the heating water heats and cools — if it fails, you get repeated venting through the relief valve, which shows up as dripping and can lead to water damage.
The condensate trap gets cleaned — this plastic container holds the acidic condensate that drains from the heat exchanger, and winter freezing or a blockage can lock the boiler out entirely, meaning an expensive emergency call-out. The magnetic filter gets cleaned too, and inhibitor is tested and topped up. The filter catches magnetite sludge that circulates during corrosion; left unmanaged, that sludge settles in radiators, wears out pumps, coats heat exchangers, and shortens your boiler’s life.
We also cover ventilation, flue flow, thermostat batteries, radiator bleeding, and gas meter electrical bonding, plus a visual inspection of hot water cylinders and valves. You get a service certificate at the end — proof of maintenance for insurance and warranty claims. Most manufacturers (Worcester Bosch, Vaillant, Ideal, Baxi) require annual servicing to keep the warranty valid.

A plan, or just booking it yourself?
The alternative is booking it yourself every year. The trouble is that a working boiler doesn’t create any urgency — reminders get postponed, and years slip by without a service. A plan gives you an automatic prompt without you having to manage the scheduling yourself.
The stronger advantage is continuity. Ad-hoc bookings mean an engineer starts from zero each time, with no way to spot gradual changes like decreasing system pressure or depleted inhibitor. A planned service with a consistent engineer picks up on trends a one-off visit never would. Plans also come with a 10% discount on additional work, which can cover several months of plan cost through a single repair.

Which plan suits you
- Basic — covers the full annual service, suited to straightforward gas boiler setups.
- Advanced — includes a fifth-year strip-down service with a deeper inspection. Gaskets and electrodes get replaced if needed, recommended for boilers approaching five years old.
- Ultimate — adds a complete unvented cylinder service and safety check. Unvented cylinders are sealed, mains-fed hot water tanks (check your loft for a cold water storage tank, or look for a discharge pipe on the cylinder) — these pressurised systems need a separate annual safety check by law.
- Oil — tailored servicing for oil boiler systems, which have different components and failure points to gas.
Why now is a sensible time
Summer offers the easiest scheduling — no urgent repairs competing for slots, no peak demand. Booking isn’t rushed, engineers aren’t stretched, and maintenance happens before problems have a chance to develop.
What the appointment involves
A standard service takes around an hour. An adult needs to be home to provide access to the boiler, gas meter, hot water cylinder, and radiators — no advance preparation is needed on your part.

Our service plans start from £9 a month, including your annual service, yearly reminders, and 10% off any future work.
Prefer to talk to a real person?
You'll speak to the engineer who'd actually do the job — not a call centre script. Ask us anything, or get a free quote.
Keep reading
More from the blog
Boiler Servicing & Repairs Boiler Breakdowns: What to Do Before You Call an Engineer
Boiler stopped working? A few safe checks before you call — power, thermostat, pressure, and when it's time to get an engineer out.
Read more
Boiler Servicing & Repairs Hot Water Not Hot Enough? A Troubleshooting Guide
Lukewarm or inconsistent hot water — checks worth doing yourself before you call an engineer, and the faults that need a professional.
Read more
Boiler Servicing & Repairs Protect Your Boiler from Limescale in Colchester & Essex
Limescale is a bigger problem in Colchester and Essex's hard water — what it does to your boiler, and how to keep it under control.
Read more