Skip to content
Boiler broken down? We offer emergency call-outs across Essex. Call 01206 912148
GH Heating Services

Heating myths that cost you money

Seven common heating myths debunked, and what actually works instead, from engineers who see it every day.

Every winter, the internet fills up with “energy-saving tips” that claim to slash your heating bills — but not all of them hold up. Some are half-true, some are outdated, and a few could even make your home less efficient.

We work with boilers and heating systems across Colchester and Essex every day, and we’ve seen which habits help and which ones quietly waste gas, money, and comfort. Here are a few of the biggest heating myths — and what actually works instead.

Photo of a GH Heating branded work van

Common heating myths, debunked

“Turning the heating off saves money” — not always. Switching your heating off stops energy use, but letting your home drop to a very low temperature can backfire. When you reheat everything — walls, floors, furniture — your boiler has to work harder and run longer to get the house comfortable again. Keep your thermostat at a consistent, moderate temperature instead, and use your programmer or smart thermostat to reduce heating when you’re out.

“Bigger boilers heat homes faster” — false. A bigger boiler isn’t automatically better. Boilers are sized to match your property’s heat demand — oversized boilers short-cycle, turning on and off too often, which wastes energy and shortens lifespan. If you’re not sure yours is sized correctly, have a Gas Safe engineer check it during a service.

“Keeping radiators on low all day is cheaper” — it depends. That can work in some well-insulated homes, but for most households it means wasting heat in empty rooms. Thermostatic radiator valves or zoning controls let each room heat only when needed.

“Bleeding radiators wastes water” — myth. Bleeding releases air, not water. That trapped air stops hot water circulating properly, leaving cold patches at the top of the radiator. Bleed radiators once a year, ideally before winter — if the water that comes out is dark or sludgy, it may be time for a power flush.

“You don’t need to service a new boiler yet” — a dangerous myth. Skipping the first service on a new boiler can void the manufacturer’s warranty, and even brand-new systems can develop early issues like debris in filters or incorrect pressure settings. Our Boiler Care Plans include your yearly service automatically.

“Turning down the thermostat by 1°C doesn’t make a difference” — it really does. It might not feel like much, but dropping your thermostat by just one degree can save around 5–10% on heating costs, often without any noticeable change in comfort.

“Boiler pressure doesn’t matter” — myth. Incorrect pressure can make your heating less efficient or cause it to shut down completely. Check your pressure gauge a few times through winter — ideally 1–1.5 bar when the system is cold.

Small habits that make the biggest difference

You don’t need complicated hacks or risky tricks to save money on heating. A few simple habits have the biggest impact:

  • Keep up with annual servicing.
  • Bleed radiators once a year.
  • Use smart or programmable controls.
  • Lower the thermostat slightly.
  • Keep vents and radiators clear of furniture.

These basics keep your boiler running smoothly, reduce breakdowns, and make every unit of energy go further.

How we can help

We’re here to make sure your system stays safe, efficient, and cost-effective through winter. Our local engineers provide:

  • Annual servicing and safety checks.
  • Boiler Care Plans with monthly payments and priority support.
  • Power flushing to restore radiator performance.
  • Smart heating control installation for effortless energy management.

All work is carried out by Gas Safe and OFTEC registered engineers, so your home stays warm and compliant all year round. Regular maintenance and good habits beat quick fixes every time.

Prefer to talk to a real person?

You'll speak to the engineer who'd actually do the job — not a call centre script. Ask us anything, or get a free quote.

Keep reading

More from the blog